|
|
|
|
|
1995-2000 Ford Contour Hood QuickLIFT & QuickLIFT Elite
Replace your hood's prop rod today with our Redline Tuning Hood QuickLIFT system. There are always areas that every OEM doesn't address due to cost, and our high-quality hood QuickLIFT system is one of them... Two gas-springs that lift and hold your hood without the need for a poorly placed prop-rod, simply start to lift your hood and let our QuickLIFT system take over. Your hood will lift and hold firmly at the raised position - no wind or bumping will knock it down on your head.
Benefits:
- No compromise system - We design our systems from start to finish - we mount the gas springs where they need to be for proper function... we utilize stock bolt locations when available, but we never compromise functionality of the system for the sake of it being 'bolt-in'.
- Simple one-handed operation, simply start to lift the hood and it will raise to the stock height unassisted in a smooth and controlled motion.
- Progressive gas springs. Our springs are not off the shelf parts, they are designed by us and manufactured to our specifications for each vehicle application. Our exclusive end-of-force dampening slows the rate of extension over the final inches of travel eliminating stress to the hood.
- QuickLIFT systems work with any hood (steel, fiberglass, SMC, carbon fiber etc.) - we design our systems using the stock hood so the main market is covered, however, our systems are made to work with 99% of aftermarket hoods. No extra parts are required. Read our FAQ for more information...
- Quick and simple installation - we design the systems and write all of our own documentation. FULL COLOR manuals will arrive that will walk ANYONE through this simple installation - our customer comes first. Every vehicle uses different hardware and mounting locations, all made easy. You do NOT need to be a mechanic or car nut like us - we are so confident in our product that we post every installation manual on our website for you to review prior to ordering.
|
|
We love cars, we love to engineer and design new unique parts for cars our passion is obvious. Each system is designed by us and we stand behind the thousands of systems we have sold. Our design is very easy to install and gets nothing but the highest marks from our customers and magazine reviews.
Shipping & Handling:
Select the desired shipping method before adding item to cart - the appropriate shipping charges will be applied at checkout. For shipments within the continental U.S. we use FedEx. For all shipments outside the continental U.S. we use USPS.
|
|
|
|
QuickLIFT system includes:
Custom manufactured gas-springs (black e-coated for QuickLIFT & PLUS, 316L Stainless steel for QuickLIFT ELITE)
Mounting hardware kit - zinc-plated for base QuickLIFT system (black powder-coated for QuickLIFT PLUS & ELITE) - - QuickLIFT PLUS is our all-black system.
Full Color Manual - Best in the industry including step-by-step instructions with detailed photos.
|
|
|
Simple and secure strut mounting.
|
|
The Contour kit can easily be installed within a half hour! Download the full-color installation manual (below) to get a head start while your order is shipped, or look through the manual to see the detail we put into this kit.
2 year limited warranty for QuickLIFT, 4 years for QuickLIFT ELITE:
Redline Tuning warrants for 2 years from the date of purchase all components included in the QuickLIFT and 4 years from the date of purchase for the QuickLIFT Elite kits. Kits transferred to other vehicles voids the warranty. Our warranty for this kit is only valid if installed on the vehicle for which it was purchased. Our manual and testing are specific to the stock hoods for specified model years your QuickLIFT was designed. Feel free to contact us if you have any questions.
|
Not all parts included are shown above
|
|
Note:
Pre-1998 Contours have a slight variation in the installation. There is ridge on the fender lip where the lower ball-stud is to be mounted that isn't present on newer Contour models. This lip must be flattened or compressed in the 1/2" location where the lower ball-stud is to be mounted. This is a simple procedure, but is required for a proper installation and only on pre-98 Contours.
|
|
|
|
|
|
|
